Products

Coupling

Fluid Technology

ELASTOMERIC COUPLING
  • Up to 4.50 kNm; 39,500 in.lb.
  • Easy to assemble/replace
  • High misalignment ratings
  • No maintenance/lubrication
  • Part-for-part interchangeable with industry standard design
  • In-stock versatile spacer design can accommodate many configurations with few parts
  • Designed from the ground up using finite element analysis to maximize flex life.
  • Easy two piece element installation. No need to move the hubs during replacement.
  • One spacer size to handle most different between shaft spacings.
  • Light weight element absorbs shock loading and torsional vibration.
  • Same hubs used on both spacer and standard elements.
  • Good chemical resistance.
FLEX COUPLING
  • High Torque Rating - 30% Increased Torque Rating, EPDM and Neoprene
  • Longer Life - Sure-Flex Plus Lasts Over 3X Longer than the Competition
  • Better Value - Save Money Using a Smaller Coupling
  • Interchangeable - Retrofits to Existing Flanges
  • Up to 8.20 kNm; 72,480 in.lb.
  • 7 to 21 degree torsional wind-up
  • Bored-to-size, spacer, bushed flange, and clamp flange designs in stock
  • Flexible design accommodates misalignment and protects equipment
  • No lubrication required
  • One-piece, split and two-piece sleeve constructions allow for easy installation under any conditions
  • ATEX Compliant
STAR COUPLING
  • Up to 0.70 kNm; 6,228 in.lb.
  • No maintenance/lubrication
  • Part-for-part interchangeable with industry standard design
  • Fail-safe design equipment will continue to drive if elastomer fails
  • Wide range of in-stock inch and metric bore sizes
SPRING COUPLING
  • Aluminum horizontal cover (T10),and all-steel vertical cover (T20) designs are available
  • Up to 169 kNm; 1,500,000 in.lbs
  • Easy to assemble/replace
  • Part-for-part interchangeable with industry standard tapered grid coupling designs
  • Coupling sizes 1020 through 1140 in-stock in a range of standard bore sizes
  • Shot-peened tapered grid flex element for long life
DISC COUPLING
  • Disc couplings consist of 2 hubs and a factory assembled transmission unit.
  • Installation involves fitting the hubs to the machinery shaft ends, introducing the transmission unit, then securing with the attachment screws
  • Maximum speeds shown are for standard materials. When higher speeds are required please consult Metrik
  • Peak torque of 1.75 and momentary torque of 2.7 times the stated ratings are accepted
  • Spark free overload protection is provided as a standard feature on all Torsiflex-i couplings, making them suitable for gas zone environments
  • Standard couplings are designed for general purpose applications and are suitable for the majority of process pump, fan, and compressors applications
  • SPECIAL COUPLING versions available include:

    • Torque overload protection
    • Limited end float
    • Electrical Insulation
    • Bolted adapters suitable for high cyclic torques
FLEX DISC COUPLING
  • Up to 270 kNm; 2,400,000 in.lbs.
  • No maintenance
  • Zero backlash Close couple,spacer and floating shaft designs available
  • Easy interchangeability
  • All metal Construction
  • No Lubrication
  • No Moving Parts
  • Long Life
  • High Torsional Stiffness
  • Precise Positioning - Zero Backlash
RIGID COUPLING
  • Bolt heads and nuts protected by flanges
  • Bored true to shaft size
  • Recommended for emergency and regular service on heavily loaded shafts
  • Outer diameters turned
  • End flanges faced square to bore