Products

Valves

  • INDUSTRIAL VALVES

    A comprehensive range of one-, two- and three-piece ball valves suitable for a wide range of general industrial applications

    FEATURES
    • Dropped and full bore models
    • ISO 5211 top mounting plate available on select models
    • Three-way, multi-port designs available
    • Seat material options available
    • Fire safe models available
    • TA Luft approved

    TECHNICAL DATA
    Pressure class: ASME 150/300: PN 10 to 100
    Dimensions: DN 8-300 (NPS ¼-12)
    Links: Screw - BSPP, BSPT, NPT Flanged - ASME 150/300, PN 10/16, PN 25/40

    MATERIALS
    Body: Carbon steel, stainless steel
    Ball and shaft: Stainless steel
    Seat: Pure PTFE, reinforced PTFE

  • CONTROL VALVE (SINGLE-V & DOUBLE-V)

    Suitable for use in a wide range of chemical, hydrocarbon and other process industry applications

    FEATURES
    • Dropped and full bore models
    • High integrity seal
    • Explosion proof and antistatic shaft design
    • Fugitive emission detection system is available
    • Fire-test certified models available
    • ISO 5211 mounting flange for easy adaptation to automatic operation, pneumatic or electric actuators
    • Suitable for high temperature, cryogenic and vacuum service
    • TA Luft / ISO 15848 fugitive emission certified
    • Locking device gap relief low torque operation
    • Jacketed Valves • Cryogenic valves • Under-tank valves

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/900/1500 PN 16 to 100
    Dimensions: DN 8-400 (NPS ¼-16)
    Temperature Range: -196°C to +500°C

    MATERIALS
    Body: Carbon and stainless steels, aluminum bronze, duplex steels, alloy 20, Monel, Hastelloy B & C, nickel, Inconel, titanium etc.
    Ball and shaft: Stainless steel and other alloys
    Seat: Pure PTFE, glass filled PTFE, copolymer E-seat, PEEK, RTFE, nylon, graphite, metal etc.

  • CONTROL VALVE (SINGLE-V & DOUBLE-V)

    Single-V and Double-V design provides cutting action between the v-notched ball and seat for smooth, clog-free operation

    FEATURES
    • Split body (Single-V) & Single body (Double-V)
    • Muy mounted
    • One-way
    • Side entry
    • Wide operating range
    • High CV
    • RTFE or steel bearings
    • Adjustable packaging
    • No spaces
    • Control precision

    TECHNICAL DATA
    Pressure class: ASME Class 150 to 300
    Dimensions: DN 25-300 (FB) (NPS 1-12) - DN 40-500 (RB) (NPS 1½-20)
    Temperature Range: -29°C to +350°C
    Connections: Flanged and flangeless
    Face to face sizes: ANSI B16.10 short pattern / ISA75.04 long pattern

    MATERIALS
    Body: Carbon steel, stainless steel Other materials on request
    Disc: Stainless steel hard coating
    Seat: Laminated metal seat, steel thick (solid) metal seat

  • THREE WAY 2 & 4 SEAT VALVE (L&T PORT)

    Used to mix or divide liquid, minimizing space and reducing pipe stress

    FEATURES
    • Positive flow stem indicator
    • Fire safe design
    • Locking device
    • Compliant with NACE MR0175
    • Positive closure
    • Integrated mounting flange
    • Explosion-proof body
    • Low torque operation
    • Can be used for high temperature applications

    TECHNICAL DATA
    Pressure class: ASME Class 150 to 300
    Dimensions: DN 15-200 (FB) (NPS ½-8) - DN 150-250 (RB) (NPS 6-10)
    Temperature range: -29°C to +270°C (+500°C optional)
    Links: Flanged

    MATERIALS
    Body: Carbon steel, stainless steel
    Other materials on request
    Ball and handle: Stainless steel (304SS, 316SS)
    Seat: PTFE, RTFE, PEEK & graphite

  • END PORT, SEPARATE BODY TRUNK VALVE

    Two-piece (cast) and three-piece (forged) end inlet designs for tight closing in gas and liquid services

    FEATURES
    • Full or narrowed hole
    • Approved design with fire protection
    • End connections: flanged, butt weld or clamped
    • Conforms to API 6D or API 6A
    • Design to ASME B16.34
    • Multi-port designs and piggy valves that change direction between variations
    • Soft, metal/soft or metal/metal sit
    • Manual or electric operation
    • Double Block and Evacuation

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/900/1500/2500 API 3000/5000/10000
    Dimensions: DN 50-1500 (NPS 2-60) three-piece
    Temperature range: -196°C to +350°C

    MATERIALS
    Complies with NACE MR0175-2020
    Wide variety of materials available in cast or forged version, including but not limited to:
    - Carbon steel
    - Super duplex (25% Cr)
    - Low alloy steels
    - Stainless steel
    - Inconel 625 and 718
    - Duplex (22% Cr)
    - 6 Mo
    - Titanium
    Site weld overlays available

  • METAL SEAT

    Metal seated ball valves for high temperature, corrosive or corrosive services in a wide range of applications

    FEATURES
    • Reliable shutdown
    • Low torque operation
    • High integrity seal
    • Fire safe design
    • Various skins available
    - Chromium carbide
    - Tungsten carbide
    - Nickel alloy
    TECHNICAL DATA
    Pressure class: ASME 150/300/600/900/1500/2500
    Dimensions: DN 15-600 (NPS ½-24)
    Temperature range: Up to 500°C

    MATERIALS
    Features determined in response to specific service requirements

  • UPPER ENTRY

    Ideal construction for high pressures and high temperatures. Usually installed in offshore applications (offshore, subsea valves)

    FEATURES
    • One Piece Body Structure
    • Internal access without removing flanges
    • Bolted or pressure tight cover
    • Approved design with fire protection
    • End connections: flanged, butt weld, clamped or through/hole pieces
    • To API 6D or API 6A
    • Design to ASME B16.34
    • Soft, metal/soft or metal/metal seating
    • Manual or electric operation
    • Double Block and Evacuation

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/900/1500/2500 - API 3000/5000/10000/15000
    Dimensions: DN 50-1400 (NPS 2-56)
    Temperature range: -196°C to +350°C

    MATERIALS
    Complies with NACE MR0175-2020

  • FULLY WELDED

    One-piece fully welded body construction minimizes the risk of external pressure leakage. This design is recommended for gas transport and storage

    FEATURES
    • Full or narrowed hole
    • Approved design with fire protection
    • Compliant with API 6D
    • Design conforming to ASME B16.34 / B31.3 / ASME VIII Parts 1 and 2
    • Extensions available for mechanical drive, ventilation and drain pipes
    • Soft, metal/soft or metal/metal seating
    • Manual or electric operation
    • Double Block and Overflow

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/900/1500
    Dimensions: DN 50-1500 (NPS 2-60)
    Temperature range: -196°C to +350°C

    MATERIALS
    Wide variety of materials available in cast or forged version, including but not limited to:
    - Carbon steel
    - Low alloy steels
    - Stainless steel
    Site weld overlays available

  • GATE VALVES

    Suitable for throttling and shutdown services for oil, gas and petrochemical plants

    FEATURES
    • Designed to ASME B16.34, API 600 and BS 1414
    • Bolted lid and pressure sealing designs
    • Sealed bellows designs
    • Chlorine, HF Alkylation, LAB etc. Hazardous service models are available.
    • Tested to API 598
    • Material compatibility to NACE is available

    TECHNICAL DATA
    Pressure class: ASME 150 to 4500
    Dimensions: DN 15-1800 (NPS ½-72)
    Temperature range: -196°C to +650°C
    Links: Flanged RF and RTJ, butt welding, hub ends

    MATERIALS
    Body: Carbon, alloy and stainless steels, Monel, Hastelloy, Incoloy, Inconel, duplex, 6 Mo, etc. Other materials on request

  • GLOBAL VALVES

    Ideal for throttling and shut-off service in oil, gas and petrochemical applications

    FEATURES
    • Designed to ASME B16.34 and BS 1873
    • Bolted lid and pressure sealing designs
    • Sealed bellows designs
    • Tested to API 598
    • Material compatibility to NACE is available

    TECHNICAL DATA
    Pressure class: ASME 150 to 4500
    Dimensions: DN 15-600 (NPS ½-24)
    Temperature range: -196°C to +650°C
    Links: Flanged RF and RTJ, butt welding, hub ends

    MATERIALS
    Body: Carbon, alloy and stainless steels, Monel, Hastelloy, Incoloy, Inconel, duplex, 6 Mo, etc. Other materials on request

  • GATE, GLOB AND CHECK VALVES

    Ideal for throttling and shut-off service in oil, gas and petrochemical applications

    FEATURES
    • Cast steel or one-piece die-forged bodies
    • Bolted lid and pressure sealing designs
    • Different regulations according to current API
    • Depending on valve type: conventional or full port design
    • Gate and ball valves have an integrated machined back seat
    • Graphite packing
    • Forged gate and globe valves have hardened pins.
    • Internal surfaces are precision machined to provide maximum performance

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/800/1500
    Dimensions: Forging: DN 15-50 (NPS ½-2) Bulk: DN 50-600 (NPS 2-24)
    Temperature range: + 649°C (1200°F) for A351 CF8 + 425°C for A216 WCB
    Links ASME B16.25 for BW ASME B16.11 for SW Flange tested to API 598 for ASME B16.5 RF

    MATERIALS
    - Carbon steel
    - Stainless steel
    Other alloy steels on request

  • GLOBAL VALVES WITH SEALING BELLOWS

    For non-critical hazardous services such as thermal oil, steam, vacuum and chemicals

    FEATURES
    • Suitable for thermal oil applications
    • Proven technologies for tight sealing in high temperature service (metal or soft seating)
    • Steam monitoring
    • Shaft sealing according to TA Luft (3.1.8.4)
    • Manual, controlled and control valves

    TECHNICAL DATA
    Pressure class: ASME 150/300/600/800 PN 10/16/25/40/50/100
    Dimensions: DN 15-350 (NPS ½-14)
    Temperature range: -60 ° C to + 420 ° C

    MATERIALS
    Body and cover: Carbon steel, cast iron or stainless steel
    Low temperature carbon steel on request

  • INNOVATIVE ELASTOMER SEAT VALVES

    Wafer type valves made of highly engineered composite material according to ISO standards

    FEATURES
    • Valve body and disc of high engineering composite material
    • Patented wafer-style body and disc
    • Excellent internal and external chemical resistance
    • Extremely lightweight construction
    • All fasteners are 316 stainless steel as standard
    • Pressure range up to PN 16
    • Can be used in high line speed applications up to 12 m/s.
    • Can be used in vacuum applications
    • Thin disc resulting in high CV
    • 4 integrated mounting holes
    • Actuator flange according to ISO 5211
    • Sustainable production philosophy as valve materials are 100% recyclable

    TECHNICAL DATA
    Pressure class: PN 10/16
    Dimensions: DN 40-300 (NPS 1½-12)
    Temperature range: -40°C to +150°C
    Flange connections: DIN PN 6/10/16, ASME 150
    Face to face: EN 558-1 / T5, API 609

    MATERIALS
    Body: Composite XP 1600 / XP 1620
    Disc: Composite XP 1620
    Lining: EPDM

  • ELASTOMER SEAT BUTTERFLY VALVES

    Wafer, lug and double flange versions are available for both general and heavy-duty industrial applications

    FEATURES
    • Actuator flange according to ISO 5211
    • Very hard, glossy, silicone-free paint system
    • Extended body neck provides pipe insulation
    • Face-to-face dimensions according to EN 558-1 (ISO 5752)
    • Polished disc edges for longer seat life and bubble-proof closure
    • Upper bushing absorbs actuator side thrust loads
    • TA Luft approved

    TECHNICAL DATA
    Pressure class: Full vacuum up to PN 25
    Dimensions: DN 40-2400 (NPS 1½-96)
    Temperature range: -40°C to +160°C
    Flanged connection: PN 6/10/16/25, ASME 125/150, JIS 10 / 16K

    MATERIALS
    Body: Cast and ductile iron, carbon steel, stainless steel
    Disc: Ductile iron, stainless steel, nickel aluminum bronze
    Seat: NBR, white NBR, EPDM, XP EPDM, FKM, PTFE / EPDM
    Other materials on request

  • HIGH PERFORMANCE BUTTERFLY VALVES

    Wafer, lug and double flanged double eccentric butterfly valves conforming to ISO or ASME standards

    FEATURES
    • Actuator flange according to ISO 5211
    • Integrated motion stop
    • Accessible packing adjustment without removing the operator
    • Bidirectional closing performance
    • End of line service
    • Soft seat, fire resistant and metal seat
    • Compact design, low weight
    • Double eccentric working principle
    • Bearings that provide stability during high pressure, high speed applications
    • TA Luft approved

    TECHNICAL DATA
    Pressure class: Full vacuum up to PN 40, ASME 150/300/600
    Dimensions: DN 50-900 (NPS 2-36)
    Temperature range: -50°C to +400°C
    Flanged connection: PN 10/16/25/40, ASME 150/300/600

    MATERIALS
    Body: Carbon steel, stainless steel
    Disc: Carbon steel, stainless steel
    Seat: RTFE, stainless steel, fire resistant Other materials on request

  • CHECK VALVES

    Wafer, lug and double flange check valves for all service, industrial and process applications

    FEATURES
    • Single, double-coated or torpedo-shaped disc design
    • Swing, lifting or tilting disc principle
    • Spring, weight or hydraulically assisted disc movement
    • Does not crash
    • Conforms to DIN, ASME, BS, PN and JIS standards
    • Low maintenance cost
    • Suitable for installation in vertical pipelines
    • Material compatibility to NACE is available
    • Rubber lined versions for all water related industrial applications

    TECHNICAL DATA
    Pressure class: up to ASME 4500
    Dimensions: DN 40-1600 (NPS 1½-64)
    Temperature range: -196 °C to +650 °C
    Links: Flanged RF and RTJ, butt welding, hub ends, wafer, lug

    MATERIALS
    Body: Cast and ductile iron, carbon steel, stainless steel, nickel aluminum bronze
    Disc: Carbon steel, stainless steel, nickel aluminum bronze
    Seat: NBR, EPDM, FPM, Stellite
    Other materials on request

  • TRIPLE EXCENTRIC VALVES

    Bidirectional, zero leakage closure, suitable for extreme pressures and temperatures

    FEATURES
    • Torque fabricated flexible metal seal provides zero leakage performance (API 598 flexible seat)
    • Quarter turn, triple offset geometry provides frictionless design
    • Solid surface, integrated metal seat
    • All-metal construction provides natural fire safety
    • Suitable for cryogenic and high temperature services
    • Design codes: ASME & EN

    TECHNICAL DATA
    Pressure class: ASME 150-1500 PN 10 to 160
    Dimensions: DN 80-2800 (NPS 3-112)
    Temperature range: -254 ° C to + 815 ° C

    MATERIALS
    Body and disc: Carbon, stainless and duplex steels, aluminum bronze
    Seat: Fully metallic, steel
    Other materials on request

  • BLADE GATE VALVES

    Blade gate valves for service in polluted media such as sewage water, soft solids, coal dust, emulsions, granules, powders, pastes.

    FEATURES
    • Two-piece body with metal gate guide
    • Can be mounted as inlet / outlet valve or between flanges
    • Tight closing in both directions
    • Self-adjusting transverse sealing to atmosphere
    • Recessed corners allow the site to be washed
    • Segmental blade radius prevents possible jamming effect
    • Cutting edge on lower body
    • Available in handwheel, electric, pneumatic or hydraulic
    • Face to face according to EN 558-1 (DIN 3202 part 1)

    TECHNICAL DATA
    • Pressure class: from vacuum to 25 bar
    • Dimensions: DN 50-1400 (NPS 2-56)
    • Temperature range: up to 400° C
    • Flange connection: PN 10/16/25/40, ASME 150/300/600

    MATERIALS
    • Body: Cast iron, ductile iron, stainless steel, Hastelloy
    • Blade: Stainless steel, Hastelloy, special material
    • Gasket: NBR, EPDM, FPM, PTFE, ceramic fiber

  • QUARTER-TURN PNEUMATIC ACTUATORS

    Rack and pinion pneumatic actuators that develop a constant output torque, ideal for smooth operation of quarter turn valves.
    FEATURES
    • Compact rack and pinion design
    • Double acting or spring return
    • Upper and lower bearings
    • Anti-friction piston pads
    • Hard anodized and ESPC coating
    • Field is reversible
    • ISO, DIN, NAMUR and Keystone mounting standards
    • Bidirectional adjustable travel stops
    • Aluminum body for low weight
    • Suitable for SIL2 applications

    TECHNICAL DATA
    Pressure class: Double-acting models: up to 2054 Nm (5.5 barg) Spring return models: up to 1414 Nm
    Maximum supply pressure: 10 barg
    Temperature range: -30 ° C to + 90 ° C

    MATERIALS
    Body: Hard anodized aluminum
    Pistons: Aluminum
    O-ring seals: NBR
    Mattress pads: Polyamide

  • PNEUMATIC ACTUATORS

    Pneumatic actuators for efficient on-off or modulating control of quarter-turn valves
    FEATURES
    • Double acting or spring return
    • Stainless steel or ductile iron body
    • Easy disassembly of spring for safe maintenance
    • ISO 5211 mounting style
    • Bidirectional movement stops
    • Symmetrical or curved yoke

    TECHNICAL DATA
    Torque outputs: Double-acting models: up to 124,256 Nm (5.5 barg)
    Spring return models: up to 65,903 Nm (spring torque)
    Pressure range: 2.8 to 8.3 barg
    Temperature range: -30°C to +100°C
    Choice: -45°C to +150°C
    Angular rotation: 90 ° ± 8 ° C

    MATERIALS
    Body: Ductile iron, stainless steel
    Cylinders: Carbon steel Xylan coated, stainless steel
    Shaft: High strength alloy steel
    Bushings: Sintered bronze
    Guide tapes: PTFE

  • HEAVY INDUSTRY PNEUMATIC ACTUATORS

    Pneumatic actuators suitable for heavy duty scottish yoke, quarter on-off or modulation service
    FEATURES
    • Double acting or spring return
    • Carbon steel construction for maximum strength
    • Fully enclosed, weatherproof body
    • Ideal for larger valves with high shearing torque and valves with high working pressure
    • Fully encapsulated, welded spring cartridge for maximum safety and ease of installation
    • External travel stops for precise stroke adjustment
    • Special coatings are available for offshore or corrosive environments
    • "Gas on Oil" and hydraulic versions

    TECHNICAL DATA
    Torque outputs: Double-acting models: up to 226,400 Nm (5 barg)
    Spring return models: up to 78,900 Nm (spring torque)
    Pressure range: Max. 10.5 barg
    Temperature range: -30°C to +100°C
    Other ranges on request

    MATERIALS
    Body: Carbon steel
    Cylinders: ENP and polished
    Piston rods and guide rods: Hard chrome plated and polished
    Bushings: bronze or sintered bronze loaded with PTFE

  • SOLENOID VALVES

    High flow, pilot operated solenoid valves for direct mounting on pneumatic actuators
    FEATURES
    • Compact design according to the diaphragm-operated poppet valve principle
    • Positive sealing and high air flow properties
    • Selectable with 5/2 or 3/2 adapter plate
    • 3/2 working spring chamber provides discharge function
    • Meets internationally recognized NAMUR standards for use in aggressive environments
    • Available versions include:
    - Weatherproof up to IP65
    - Explosion-proof type "ed", "m"
    - Naturally safe

    TECHNICAL DATA
    Air pressure range: 2-8 barg
    Voltage: 24-230 V
    Temperature range: -25°C to +55°C
    Port size: ISO 228 - G1 / 4

    MATERIALS
    See separate product data sheets for details of construction and materials

  • POSITION MONITORING DEVICES

    A wide range of AVID®, quarter-turn valve position monitoring devices
    FEATURES
    • Model CR - economical IP66 enclosure with solenoid valve integration as standard
    • Model XA - hazardous area, suitable for hazardous area, Ex d applications
    • Model ZR - corrosion resistant IP67 enclosure for general purpose and intrinsically safe applications
    • Model ZR Plus - for position monitoring and integrated solenoid valve control in a single housing
    • Low profile switch box - simplified setting of switches or sensors in an aluminum housing
    • All models feature a HiVue beacon for long distance visibility, an Easifix spindle for screwless switch adjustment and a Modmount for direct mounting on R&P actuators

    TECHNICAL DATA
    Options available for all hazardous area classifications
    Complies with VDI / VDE 3845 Standard

    MATERIALS
    See separate product data sheets for details of construction and materials

  • POSITIONERS

    AVID® series of pneumatic and electropneumatic positioners for proportional operation and advanced digital control of actuator valves
    FEATURES
    • Analogue
    - Automatic calibration with push buttons or infrared
    - Corrosion resistant enclosure - HiVue native display
    - Optional switches or sensors for fully open or closed position detection
    • Programmable
    - For advanced control of rotary and linear actuators
    - Automatic calibration with keypad or HART
    - Diagnostic information available (FDT / DTM)
    - Programmable PID features
    - Remote mount sensor option for high vibration environments (max. 15 m / 50 ft)

    TECHNICAL DATA
    Operating pressure: 2.8 to 8 bar
    Signal: 0.2 to 1.0 bar 4-20 mA
    Temperature range: -40 ° C to + 75 ° C

    MATERIALS
    See separate product data sheets for details of construction and materials

  • COMPACT ELECTRIC ACTUATORS

    For operation of quarter-turn valves or dampers
    FEATURES
    • Compact, epical gear reducer with robust construction (IP68) suitable for corrosive environments
    • Replaceable base plates for easy connection to all valve types
    • Adjustable (+/- 10 °) stops in both directions
    • Manual override is independent of motor drive
    • An innovative motor working with all voltages; 100% duty
    • Includes a local valve position indicator
    • Universal voltage supply for DC or 1-ph AC (optional 3-ph)
    • Variable speed control that can be adjusted independently in both directions
    • Accurate and adjustable torque control from 40% to 100% of rated torque
    • Optional modules for various features

    TECHNICAL DATA
    Operating pressure: 2.8 to 8 bar
    Signal: 0.2 to 1.0 bar 4-20 mA
    Temperature range: -40 ° C to + 75 ° C

    MATERIALS
    Anodized aluminum gearbox and enclosure electrostatic powder coating

  • SMART PROGRAMMABLE ACTUATORS

    Next generation smart electric actuators will take a new step towards integration into automated process plants
    FEATURES
    • Easy installation and commissioning
    • Mess-free configuration
    • Shorter installation time
    • Dual screen
    • Position indicator in case of power failure
    • Native buttons for full actuator access
    • Password protection to prevent unauthorized access
    • Diagnostics are displayed in multiple languages ​​for both alarms and warnings
    • Bluetooth interface as standard
    • Fewer parts provide higher reliability and lower maintenance costs
    • FDT / DTM support

    TECHNICAL DATA
    Torque: up to 340.000 Nm
    Voltage: 110-690 V
    Temperature range: -55°C to +85°C
    Speed ​​limit: 6 to 180 seconds

    MATERIALS
    Anodized aluminum enclosures with epoxyvinyl paint protection RAL 9007 (grey)

  • PILOT CONTROLLED VALVE

    For superior sealing in demanding service such as gas liquid, steam, flashing liquids, cryogenics, etc.
    FEATURES
    • Pop or modulation action
    • Bubble-proof performance
    • Low cost maintenance
    • Not sensitive to back pressure
    • External adjustable blowdown
    • Stable even in two phase flow
    • On-site testing available
    • High capacity / high pressure
    • Configurations suitable for dirty services

    TECHNICAL DATA
    Pressure range: 1 to 425 bar (optional up to 690 bar)
    Dimensions: NPS 1 x 2 - NPS 8 x 10 (single or dual output)
    Temperature range: -252 ° C to + 538 ° C

    MATERIALS
    - Carbon steel
    - Austenitic stainless steels
    - Hastelloy
    - Monel
    - Duplex
    - Inconel / Incoloy
    - Titanium
    Other materials on request

  • SPRING SAFETY VALVE

    Metal or soft seat safety valves for oil and gas and process applications
    FEATURES
    • Capacity approved
    • High capacity
    • Full nozzle design
    • Traditional / bellows open hood design
    • Design codes according to ASME VIII / API 526 and TRD / AD 2
    • Liquid coating design
    • On-site testing
    • Cost-effective maintenance
    • Flanged, threaded, hub, socket and butt weld connections

    TECHNICAL DATA
    Pressure class: ASME 150 to 2500 PN 10 to 400
    Dimensions: NPS ½ x 1 - NPS 28 x 36
    Temperature range: -196°C to +815°C
    Links: Compliance with ASME / DIN connections

    MATERIALS
    - Carbon steel
    - Austenitic stainless steels
    - Hastelloy
    - Monel
    - Duplex
    - Inconel / Incoloy
    - Titanium
    Other materials on request

  • ASME 1 -BOILER VALVES

    Drum, superheater, reheater and economizer valves for all types of boiler and steam systems
    FEATURES
    • Set pressure up to 96%+ set pressure
    • Exceptional tightness minimizes maintenance resources and repair intervals
    • Lower life cycle costs
    • Full and half nozzle designs are available
    • HCI style lift restriction facility
    • Open and closed hoods are available
    • Air hoods for outdoor service

    TECHNICAL DATA
    Pressure class: ASME 150 to 2500 flanged or butt-welded inlets and flanged outlets
    Dimensions: DN 40-150 (NPS 1½-6) inlets
    Temperature range: Saturated steam up to 593°C

    MATERIALS
    Body and cover: Carbon steel, alloy steel
    Other body materials on request
    Stainless steel cap
    Stainless steel / Inconel disc seat

  • SELECTOR AND DIVERTER VALVES

    Double pressure relief system for all process industry applications
    FEATURES
    • Double Safety Valve System
    • One valve can be isolated for 1 valve active and 1 standby or 2 valves for maintenance
    • Guaranteed less than 3% pressure drop
    • Air release valves are standard
    • Improved external sealing without bellows
    • Integrated flat sites
    • Rising non-rotating body
    • Positive drive chain locking

    TECHNICAL DATA
    Pressure class: up to ASME 2500
    Dimensions: DN 50-300 (NPS 1-12)
    Temperature range: -252 ° C to + 427 ° C

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Duplex
    - other alloys
    Seat: PTFE, PEEK or Grafoil

  • INDUSTRIAL COMMODITY

    Metal or soft seat safety valves for all industrial applications

    FEATURES
    • Capacity approved
    • ASME I, IV, VIII
    • High capacity
    • Full or half nozzle
    • Conventional / open cover design ASME B16.47, BS 3243

    TECHNICAL DATA
    Pressure class: ASME 150 to 900 PN 10 to 63
    Dimensions: DN 8-150 (NPS ¼-6)
    Temperature range: -196 °C to +427 °C
    Links: According to ASME / DIN standards

    MATERIALS
    - Carbon steel
    - Austenitic stainless steels
    - Bronze
    - Iron
    - Aluminum

  • PNEUMATIC CONTROLLED

    Efficiency of plant operation can be increased by applying pneumatically controlled operation to the spring-loaded safety valve
    FEATURES
    • High tightness up to the set pressure with additional loading
    • Small opening and closing differences
    • High setting accuracy and repeatability
    • Pressure setting of the safety valve during normal plant operation
    • A control unit can be combined with two or more valves

    TECHNICAL DATA
    Pressure class: ASME 150 to 2500 PN 10 to 400
    Dimensions: DN 50-600 (NPS 2-24)
    Temperature range: -20°C to +700°C
    End connections: According to ASME / DIN standards

    MATERIALS
    - Carbon steel
    - Stainless steel
    - High temperature alloy steel

  • TANK CUSHION REGULATORS

    For the protection of stored liquids and the safe operation of low pressure storage tanks

    FEATURES
    • Spring or pilot operated
    • Perfect sealing
    • Single stage up to 14 bar DP
    • One setting
    • Low installation costs
    • Low cost maintenance

    TECHNICAL DATA
    Pressure class: up to 14 bar
    Dimensions: NPS ½, 1 and 2
    Temperature range: Up to 260°C

    MATERIALS
    - Carbon steel
    - Stainless steel
    Seat: Elastomeric

  • LOW PRESSURE PILOT CONTROLLED

    Safety valves for low pressure tanks, refrigerated, cryogenic and chemical processes and liquefied gas carriers
    FEATURES
    • Pop or modulation action
    • Suitable for cryogenic service
    • External adjustable blowdown
    • Not sensitive to back pressure
    • On-site testing
    • Perfect sealing
    • Large capacities

    TECHNICAL DATA
    Pressure range: Full vacuum up to +3.5 bar
    Dimensions: NPS 2-12, vent or pipe outlet
    Temperature range: -252 °C to +205 °C

    MATERIALS
    - Aluminum
    - Stainless steel
    - Carbon steel
    Sit: Elastomeric or plastic

  • VENTILATION VALVE

    Pressure and vacuum relief valves for tank safety and integrity

    FEATURES
    • Available in "vent to atmosphere" and "removal" models
    • Replaceable pressure and vacuum seat rings reduce maintenance time
    • Steam jackets available
    • Options for heavy chemical service
    • Weight-loaded / spring-loaded models available

    TECHNICAL DATA
    Pressure range: 0.0025 bar to 3.5 bar
    Vacuum range: -0.0025 bar to -0.8 bar
    Dimensions: DN 50-300 (NPS 2-12)
    Links: Flanges conforming to ASME, DIN or other standards

    MATERIALS
    - Aluminum
    - Cast iron
    - Carbon steel
    - Stainless steel
    - Monel
    - other alloys

  • FLAME AND ANTI-EXPLOSION

    A complete range of flame and explosion arresters for maximum protection against flame and explosion propagation

    FEATURES
    • Suitable for low flash point flammable gases or vapors
    • In connection with in-line, end-of-line or pressure and vacuum relief valves
    • Suitable for gas groups IIA, IIB and IIC
    • Special models for engine protection
    • Explosion and extinguishing units available
    • Minimum pressure drop
    • Designed to BS 7244, UL, USCG and EN 'long burn' requirements
    TECHNICAL DATA
    Dimensions: DN 8-600 (NPS ¼-24)
    Temperature range: -30°C to +150°C

    MATERIALS
    - Aluminum
    - Cast iron
    - Carbon steel
    - Stainless steel
    - Hastelloy
    - other alloys

  • VALVES AND MANIFOLDS

    Hand, gauge valves and manifolds for instrument isolation, purging, calibration and venting service

    FEATURES
    • Single isolation valves for ventilation or isolation service
    • 2, 3, 4 or 5 valve versions
    • Closed coupling or remote mounted
    • Suitable for coplanar or biplane transmitter flange connections
    • Shell version conforming to international standards
    • Gas, liquid or steam service
    • Adjustable packing packing for longer valve life
    • Non-rotating ball end handle for bubble sealing
    • Power or natural gas configurations

    TECHNICAL DATA
    Pressure range: 414 bar as standard 690 bar options are available
    Dimensions: Hand valves NPS ¼-1, manifold NPS ¼-½ Manifolds have NPS 2⅛ (DN 54) CTRS
    Temperature range: Up to 538°C

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Monel
    - Duplex
    - and other exotic materials

  • PRIMARY ISOLATION

    Hand, gauge valves and manifolds for instrument isolation, purging, calibration and venting service
    FEATURES
    • Primary isolation service
    • Replaces traditional bulk valve assemblies
    • Close connection of instruments
    • One Piece Forged Body
    • Fire safety tested and certified according to API 607
    • Flanged or threaded connections
    • Needle / globe / ball valve combinations
    • Meets ASME B16.5 and B16.34
    • Selection of block, block and bleed and combination of double block and bleed

    TECHNICAL DATA
    BPressure class: ASME 150 to 2500: 10,000 API
    Dimensions: NPS ½ flanged to NPS 3
    Temperature range: Up to 538°C

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Monel
    - Duplex
    - and other exotic materials

  • HOUSING SYSTEMS

    Protection of field instrumentation from cold temperatures and harsh environments

    FEATURES
    • Choice of frame sizes
    • Complete design and assembly service
    • Reduces 2, 3 and 5 valve housing manifold inner brackets and piping work
    • Weatherproof up to IP66
    • Complete range of accessories, windows, cable glands and brackets
    • Heated version available
    • Isolated version available

    TECHNICAL DATA
    Pressure range: 414 bar as standard 690 bars available
    Dimensions: 5L (single 330x400x428mm) 15L (double 500x495x600mm) 24L (multiple 800x495x600 mm)
    Temperature range: From -70 ° C

    MATERIALS
    - Fire resistant solid FRP
    - Antistatic and insulated options available

  • ELASTOMER SEAT GATE VALVES

    Suitable for a wide range of power applications

    FEATURES
    • Pressure-tight cover
    • Made of cast steel
    • Various wedge configurations
    • Stellite sit faces
    • Full pass design
    • Designs in accordance with ASME B16.34

    TECHNICAL DATA
    Pressure class: ASME 900-2500
    Dimensions: DN 50-600 (NPS 2-24)
    Temperature range: -30°C to +650°C
    Links: Flanged and butt welding

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel
    - Stainless steel
    Other exotic ingredients on request

  • SEPARATE ELASTOMER SEAT AND PARALLEL SLIDING GATE VALVES

    Ideal for reliable isolation of steam and water at high pressure and high temperature
    FEATURES
    • Pressure-tight cover
    • Made of forged steel
    • Parallel slide disc / split wedge
    • Stellite Seats
    • Specially designed holes and intermediate values
    • ASME B16.34, DIN, TRD designs

    TECHNICAL DATA
    Pressure class: ASME 900-4500 PN 160 to 720
    Dimensions: DN 20-600 (NPS ¾-24)
    Temperature range: -30°C to +650°C
    Links: Butt welding

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel
    - Stainless steel
    Other exotic ingredients on request

  • PARALLEL SLIDING GATE VALVES (BIRD-EYE DESIGN)

    High pressure parallel gate valves with "low pressure drop" or "high velocity flow" specifications
    FEATURES
    • Pressure seal hood
    • Made of cast steel
    • Parallel scroll disc
    • Eyelet follower (olukfolloı)
    • Stellite sit faces
    • Design in accordance with ASME B16.34

    TECHNICAL DATA
    Pressure class: ASME 1000-2850
    Dimensions: DN 125-600 (NPS 5-24)
    Temperature range: -30°C to +650°C
    Links: Butt welding

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel

  • GLOBAL VALVES

    Ball and screw check valves suitable for a wide range of power applications
    FEATURES
    • Bolted and pressure-tight cover designs are available
    • Made of cast and forged steel
    • "Y", "T" and elbow down pattern configurations available
    • Stellite Seats
    • Designs according to ASME B16.34, DIN and TRD codes
    • Screwless non-return models are available

    TECHNICAL DATA
    Pressure class: ASME 900 - 2700 PN 160-500
    Dimensions: DN 15-600 (NPS ½-24)
    Temperature range: -30°C to +650°C
    Links: Flanged, socket or butt weld ends

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel
    - Stainless steel
    Other materials on request

  • PISTON CHECK VALVES

    Suitable for irreversible tasks in a wide range of power applications

    FEATURES
    • Bolted and pressure-tight hood designs available
    • Made of cast and forged steel
    • Stellite Seats
    • Designs according to ASME B16.34, DIN and TRD codes

    TECHNICAL DATA
    Pressure class: ASME 150 to 2700 PN 40 to 500
    Dimensions: DN 50-600 (NPS 2-24)
    Temperature range: -30°C to +650°C
    End connections: Flanged, socket or butt weld ends

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel
    - Stainless steel
    Other exotic ingredients on request

  • BREAK AND DISCO CHECK VALVES

    Suitable for irreversible tasks in a wide range of power applications

    FEATURES
    • Bolted and pressure-tight cover designs are available
    • Made of cast and forged steel
    • Stellite Seats
    • Designs according to ASME B16.34, DIN and TRD codes

    TECHNICAL DATA
    Pressure class: ASME 900 to 2850 PN 160 to 320
    Dimensions: DN 50-600 (NPS 2-24)
    Temperature range: -30°C to +650°C
    End connections: Flanged or butt weld ends

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel
    - Stainless steel
    Other exotic ingredients on request

  • BOILER TRIM VALVES

    Relief and continuous drain valves
    FEATURES
    • Seatless Valves
    - No sit, live loaded packing and slow opening
    • Unit tandem
    - Combination of hard bearing/hard bearing or hard bearing/without seat in one housing
    - Reduces potential leaks
    - Fits indoor
    • Hard Ground Valves
    - Stellite valve and seat
    - Provides long service life
    - Wear resistant

    TECHNICAL DATA
    Pressure class: ASME 300 to 2700
    Dimensions: DN 25-65 (NPS 1-2½)
    Temperature range: -30°C to +650°C
    End connections: Flanged, socket or butt weld ends to ASME standards

    MATERIALS
    - Carbon steel
    - Alloy steel

  • STEAM STRAINERS AND STRAINERS

    For use in drip irrigation, monitoring and process applications
    FEATURES
    • Irreparable drip and trace vapor traps
    - Thermostatic and thermodynamic technologies
    • Repairable drip and tracer vapor traps
    - Thermostatic, thermodynamic and variable hole technologies
    - Unibody plus technology
    • Process steam traps
    - Batch and thermostatic double gap continuous process applications
    - Thermostatic: high capacity 100,000 kg / hour
    - Variable bore technology for high pressure applications
    - Arm technology applications for high capacity

    TECHNICAL DATA
    Pressure class: ASME 150 to 4500 PN 25 to 640
    Dimensions: DN 10-100 (NPS ⅜-4)
    End connections: Flanged, socket or butt weld ends to ASME standards

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Alloy steel

  • DISCHARGE STEAM AND COLD BACKHEATING CHECK VALVES

    Specially designed "free swing" check valve for waste steam or cold reheat non-return applications

    FEATURES
    • Bolted and pressure-tight cover designs are available
    • Tilting disc or rotating disc
    • Stellite sit faces
    • Counterweight available
    • Side-mounted or center-mounted actuator
    • Working with pneumatic or gravity
    • Designs in accordance with ASME B16.34, DIN, TRD codes

    TECHNICAL DATA
    Pressure class: ASME 150 to 1000 - PN 40 to 100
    Dimensions: DN 150-1000 (NPS 6-40)
    Temperature range: -30°C to +650°C
    End connections: Butt welding

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel

  • PUMP PROTECTION VALVES AND SYSTEMS

    Automatic minimum flow valves or systems for the protection of centrifugal pumps
    FEATURES
    • Single valve works like this:
    - Integrated check valve
    - Flow sensing element
    - Bypass control valve
    - Bypass actuator
    - Multistage pressure relief valve
    • Reduces installation and maintenance costs
    • Eliminates cavitation in valves and pipes
    • Intrinsically safe mechanical design with static seal, no package design, no leakage to atmosphere
    • Flow loop test and performance curve evaluation certificate
    • Multistage Turbo Cascade Control Valve

    TECHNICAL DATA
    Pressure class: ASME 150 to 4500 PN 25/40 to 640
    Dimensions: DN 25-300 (NPS 1-12)
    Temperature range: -30°C to +650°C
    End connections: Flanged or butt welded to ASME or DIN standards

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Alloy steel
    - High alloy steel
    Other exotic ingredients on request

  • BOILER LEVEL INDICATORS

    Control valve series for precise and economical control of steam temperature
    FEATURES
    • Multiple nozzles, steam assisted, high temperature steam boilers
    • Available in Venturi style, fixed nozzle design
    • Easy installation: few components, compact size
    • Excellent and uniform spray quality
    • Water capacity up to 100 m³ / hour
    • Steam temperature: control at 5 °C of saturation
    • Repeatability ±1%
    • Wide control range> 1:60
    • Stellite sit
    for long lasting tight closing • TRD100, ASME B16.34, Stoomwezen (Netherlands), IBR IIIC (India), Austria TÜV certified

    TECHNICAL DATA
    Pressure class: ASME 150 to 2500 PN 25/40 to 400
    Dimensions: water side DN 25-80 (NPS 1-3)
    steam side DN 80-100 (NPS 3-4)
    End connections: Flange and butt welding according to EN, ASME, DIN and BS standards

    MATERIALS
    - Carbon steel
    - Stainless steel
    - Alloy steel
    Other exotic ingredients on request

  • THERMAL STEAM COOLERS

    Reducing steam pressure and temperature in a single unit
    FEATURES
    • Single unit replaces traditional pressure reduction and desuperheating systems
    • Steam boost attempt with very small water droplets
    • No thermal shock protection sleeve required to protect the steam pipe (HP design)
    • Perforated plug reduces noise level in single or multistage
    • LP, IP and HP turbine bypass valves with hydraulic or pneumatic actuators
    • LP, IP and HP turbine bypass valves with quick-opening safety function in accordance with German code TRD421
    • Perforated cage protects valves against thermal shock

    TECHNICAL DATA
    Pressure class: ASME 150-4500 PN 25/40 to 640
    Dimensions: DN 10-600 (NPS ⅜-24)
    Temperature range: + 150 ° C to + 620 ° C
    Links: Flanged or butt weld

    MATERIALS
    - Carbon steel
    - Alloy steel
    - High alloy steel

  • STEAM CONDITIONING VALVES AND TURBINE BYPASS SYSTEMS

    Control valves in water and steam cycles of power generation plants
    FEATURES
    • Low noise level and cavitation-free, thanks to the multi-stage trim system
    • Pressure balanced plug provides low body forces
    • Extended outlet size to reduce the velocity of the steam-water mixture
    • Internal parts are easy to maintain and reinstall
    • Reserved shrinking and sealing area
    • Large body reduces flashing effects
    • Construction in accordance with DIN and ASME standards

    TECHNICAL DATA
    Pressure class: ASME 300 to 4500 PN 64 to 640
    Dimensions: DN 15-700 (NPS ½-28)
    Temperature range: +20 °C to +550 °C
    Links: Flanged or butt weld

    MATERIALS
    - Carbon steel

  • STEAM AND FEED WATER CONTROL VALVES

    Used to bypass the pipes in the preheater in case of pipe leakage
    FEATURES
    • Moderately operated according to the locking handle release principle
    • High clamping forces by the system environment
    • Quick and safe shutdown of preheaters

    TECHNICAL DATA
    Pressure class: ASME 900-4500 PN 160-500
    Dimensions: DN 80-500 (NPS 3-20)
    Temperature range: + 100 ° C to + 360 ° C
    Links: Butt welding

    MATERIALS
    - Forged or cast carbon steel

  • FEED WATER BYPASS VALVES

    Wafer, lug and double flanged lined butterfly valves for highly corrosive liquids, gases and slurries
    FEATURES
    • Mechanically loaded shaft seals
    • Polyester coated body resistant to heavy atmospheric corrosion
    • Threaded body flanges reduce the cold flow of the seat
    • High CV value
    • Actuator flange in accordance with ISO 5211
    • Self-lubricating bearing
    • TA Luft approved

    TECHNICAL DATA
    Pressure class: Full vacuum up to PN 10
    Dimensions: DN 40-900 (NPS 1½-36)
    Temperature range: -40°C to +200°C
    Flange fit: PN 10/16, ASME, JIS

    MATERIALS
    Body: Ductile Iron
    Disc: PFA, conductive PFA, UHMWPE, stainless steel
    Seat: PTFE, TFM, conductive TFM, UHMWPE
    Support ring: Silicone, FKM

  • LINED BUTTERFLY VALVES

    High performance lined ball valves for isolation and control in abrasive applications
    FEATURES
    • The body is completely covered with PFA
    • High integrity packing and lined shaft
    • Fugitive emission detection system is available
    • Full pass
    • Constant operating torque
    • One Piece Ball / Shaft Structure
    • Bondage is minimized
    • Control services models
    • TA Luft approved

    TECHNICAL DATA
    Pressure class: From full vacuum to 16 bar and ASME 150
    Dimensions: DN 15-150 (NPS ½-6)
    Temperature range: -40°C to +210°C

    MATERIALS
    Body: Nodular or carbon steel PFA lined
    Ball: PFA coated, ceramic
    Seat: PTFE
    Shaft: PFA lined
    Other materials on request

  • LINED BALL VALVES

    High performance lined ball valves for isolation and control in abrasive applications
    FEATURES
    • Inline sampling ensures a truly representative sample
    • Available in a bottle or syringe collection method
    • PFA lining available for aggressive services
    • Reliability of each sample is ensured due to the ease of assembly and disassembly for cleaning
    • The use of a universal seat for all sizes allows for a quick and easy seat change
    • Tightness in accordance with EN 12266, leakage rate: A bubble-proof
    • TA Luft approved

    TECHNICAL DATA
    Dimensions:
    Valve: DN 25-100 (NPS 1-4) wafer or flange
    Syringe: 20-250 ml
    Pressure:
    Valve: 16/25 bar
    Syringe: 10 bar
    Vacuum: 0.1 mbar
    Temperature:
    Valve: SS up to 200 °C
    PFA coated up to 180°C
    Syringe: up to 160 ° C

    MATERIALS
    - PFA lined
    - Stainless steel
    - Hastelloy

  • SAMPLE VALVES

    Designed for highly corrosive liquids. The removal of the liquid sample takes place with a closed reactor during the reaction process. Toxic gas to atmosphere doesn't run away
    FEATURES
    • Can be mounted directly on all reactors, lined, enameled or stainless steel
    • Direct connection of PFA heavy duty suction hose
    • All wetted parts are PFA, PTFE or glass
    • Soft-sealed ball check valve protects the vacuum line and is suitable for an automatic operation
    • Direct mounting of all auxiliary valves with integrated 2-hole mounting flange
    • Easy attachment of pH probe
    • The transfer device eliminates the need to stop the process or open the reactor
    • Modular design, various transfer devices and auxiliary valves can be mounted directly

    TECHNICAL DATA
    Pressure: Max. 10 bars
    Heat: Max. 200°C
    Sample volume: 150/250/500 ml

    MATERIALS
    PFA coated stainless steel

  • REACTOR SAMPLING SYSTEMS

    Flanged Y-angle and under-tank sludge ball valve for isolation and drainage of highly corrosive and scaling media
    FEATURES
    • Split and monoblock body
    • Robust body at full bore for low pressure and high pressure
    • Extra features in wall thickness
    • Low pressure drop
    • Pipe mount or direct tank mount
    • Manual and a wide range of electric, pneumatic and hydraulic actuators
    • Proven design in high scale and abrasive slurries
    • PED approved

    TECHNICAL DATA
    Pressure class: ASME 150 to 600
    Dimensions: DN 50-800 (NPS 2-32)
    Temperature range: -29°C to +455°C
    Flange accommodation: ASME

    MATERIALS
    Body: Carbon steel
    Disc and seat: Carbon steel or stellite coated stainless steel

  • 45° Y TYPE ANGLE MUD VALVES

    Flanged 90° angle, bayonet, 3-way combination and mud valve for isolation and diverting of highly abrasive and scaling media

    FEATURES
    • Bolted angle piston type check valve
    • Angle, bayonet and 3-way combination valves feature in-line resealable seat design
    • Extra features in wall thickness
    • Large stem diameter for strength and rigidity
    • Pinion shaft arrangement for air motor operation
    • Optional bolted clutch arrangement for impact operation
    • Manual and a wide range of electric, pneumatic and hydraulic actuators
    • Proven design in high scale and abrasive slurries

    TECHNICAL DATA
    Pressure class: ASME 150 to 600
    Dimensions: DN 50-900 (NPS 2-36)
    Temperature range: -29°C to +455°C
    Flange accommodation: ASME

    MATERIALS
    Body: Carbon steel
    Disc and seat: Carbon steel or stellite coated stainless steel

  • 90° Y TYPE ANGLE MUD VALVES

    EHEDG and 3A approved linear diverter valves suitable for all hygienic applications in dairy, breweries and all related food processes

    FEATURES
    • One Piece Body Design
    • Water hammer resistant
    • No additional CIP connection required
    • Patented double seat design, 100% mixproof
    • On-site service and cleaning
    • Suitable for creating manifolds up to 150 valves
    • Integrated 3-position pneumatic actuator for independent seat lifting
    • Control head available for local and remote location detection and 3 integrated solenoid valves
    • Fieldbus support for AS-interface and DeviceNet

    TECHNICAL DATA
    Pressure rating: From full vacuum to PN 10
    Dimensions: DN 10-150 (NPS ⅜-6)
    Temperature range: -40°C to +110°C
    Links: Butt welding

    MATERIALS
    Body: Stainless steel
    Other parts: Stainless steel
    Seat: PTFE, FPM

  • ANTI-MIX PROCESS VALVES

    EHEDG and 3A approved linear diverter valves suitable for all hygienic applications in dairy, breweries and all related food processes

    FEATURES
    • Standard electric motors are available in EEX e and EEX d versions
    • Standard mechanical seals according to DIN 24960
    • Appropriate NPSH
    • Low noise
    • Suitable for CIP
    • Wide variety of options such as heating jackets, frequency controllers, washer seals.
    • With union, flat end or flange
    • Designed according to EHEDG recommendations
    • Self-priming options available

    TECHNICAL DATA
    Discharge pressures: up to 60 bar
    Maximum flow capacity: 230 m³ / h
    Temperature range: Up to 110 ° C

    MATERIALS
    All components: Stainless steel
    Gaskets: Stainless steel, silicon coated
    Elastomers: NBR, EPDM, PTFE, FPM
    Other materials on request

  • CENTRIFUGAL PUMPS

    EHEDG and 3A approved linear diverter valves suitable for all hygienic applications in dairy, breweries and all related food processes

    FEATURES
    • Offers huge potential savings by greatly reducing maintenance time
    • Suitable for both imperial and metric pipe
    • Approved food grade seat and gasket material options
    • Suitable for both isolation and flow control functions
    • Two-way talent
    • One-piece, mirror-polished disc and stem assembly
    • High CV, thin profile disc
    • Integrated locking

    TECHNICAL DATA
    Pressure rating: From full vacuum to PN 10
    Dimensions: DN 25-150 (NPS 1-6)
    Temperature range: -10 ° C to + 95 ° C

    MATERIALS
    Body: Stainless steel
    Disc: Stainless steel
    Seat: Silicone, EPDM, FPM

  • HYGIENIC BUTTERFLY VALVES, ACTUATORS AND CONTROLS

    Stainless steel butterfly valves in wafer, flanged, screwed or butt-welded configurations for all shut-down and control applications in hygienic processes

    FEATURES
    • Offers huge potential savings by greatly reducing maintenance time
    • Suitable for both imperial and metric pipe
    • Approved food grade seat and gasket material options
    • Suitable for both isolation and flow control functions
    • Two-way talent
    • One-piece, mirror-polished disc and stem assembly
    • High CV, thin profile disc
    • Integrated locking

    TECHNICAL DATA
    Pressure rating: From full vacuum to PN 10
    Dimensions: DN 25-150 (NPS 1-6)
    Temperature range: -10 ° C to + 95 ° C

    MATERIALS
    Body: Stainless steel
    Disc: Stainless steel
    Seat: Silicone, EPDM, FPM

  • CRYOGENIC SERVICE VALVES

    Many valve brands featured on our website are suitable or easily adapted for use in low temperature and cryogenic service conditions

    FEATURES
    • Manufacturing and assembly expertise to low temperature specifications
    • Dedicated in-house testing facilities for seat area and atmospheric leakage
    • Ability to test at specified temperatures down to -254 °C
    • Clean area assembly facilities
    • Registration of the execution of the important contract in this specialty
    • Extensive familiarity with key end-user specification requirements

    TECHNICAL DATA
    Pressure Class: ASME 150/300/600/900/1500
    Dimensions: DN 8-1200 (NPS ¼-48)
    Temperature range: -254 °C to -20 °C
    Links: As stated

    MATERIALS
    Body: Carbon steels, stainless steels
    Sites: PTFE or other, as specified

  • GATE VALVES

    Sliding gate valve series control liquid, steam and gaseous media precisely, quickly and economically.

    A sealing plate fixed in the body at right angles to the flow direction has a certain number of cross path slots of equal height.

    A movable disk with the same slot arrangement moves parallel to the hard disk, thereby changing the flow cross section. The prevailing differential pressure presses the movable disk against the hard disk and seals it.

    This operating principle also causes the self-adjustment effect of the moving disc. This surface is less exposed to wear compared to ball valves with the o-ring principle due to sealing.

    As a result, the sliding gate design offers an extremely compact, relatively light and therefore convenient valve.

  • SPLIT DISC VALVES

    Slotted disc valves offer excellent and variable control with high precision over a wide flow range.

    Due to the robust design and bidirectional flow capability, slotted disc valves are suitable for liquids and vapors even if contaminated by particles.

    Its wide range of applications includes areas such as building materials, chemical and power plants, pipelines, water supply and disposal, and shipbuilding.

    An ingenious simple yet effective valve design!

    The segment disc principle operating without actuator in abbreviated design is a multitude of manually operated orifices for individual adjustment of flow and pressure.

  • SIT VALVES

    Sit valves are highly reliable all-round valves in the valve world. Our product range is made of stainless steel or stainless steel with a stainless steel cover or a lightweight plastic actuator. Includes bronze on/off and control valves.

    They are available with a threaded or triple clamp connection, the actuation is pneumatic or motor driven and can be supplied with a flanged body.

  • SHELL VALVES

    Shell valves, especially designed to handle demanding duties, slurries and viscous liquids, are suitable for control and isolation.

    This valve series is characterized by its wide operating range and high flow capacity.

    They are self-cleaning due to specially designed shell sectors.

    With pneumatic and electric actuators, it is the best choice for very precise control in the mining, paper, steel, chemical, building materials and wastewater industries.

  • Pinch VALVES

    Unlike other valve types, only a few components inside pinch and diaphragm valves come into contact with the operating fluid.

    Long service life, reliability, safety and resistance to aggressive and corrosive environments, combined with the excellent control quality of the integrated positioner, make it ideal with minimal maintenance and low operating costs. provides control valve.

    Pneumatic or motor-operated pinch and diaphragm valves are real for applications in the chemical industry, cosmetics, environmental technology and water treatment, as well as electroplating or the food and beverage industry. is an alternative.

    Pinch valves for endless tubes offer a modern alternative to traditional pinch or diaphragm valves.

    The pinch valve can be used in any position on an endless tube for on/off and control operations.

    Without dead space, the highest hygiene demands can be met.

  • POSITIONERS

    Compact positioners in analog and digital versions for mounting on pneumatic control valves.

    By involving the positioner in the valve movement, no moving parts are accessible from the outside. This increases operating efficiency and eliminates the risk of accidents

    • Compact dimensions save space while integrating into systems
    • Suitable even for short strokes
    • Visual display of possible position between positioner and valve operation

  • ELECTRIC ACCUATORS

    In addition to a precision throttle element, a precision actuator is also required to solve complex control tasks.

    This requirement is fully met by two electric actuators type 2030 and type 2032.

    The development is particularly focused on control accuracy, high positioning speed and reliability.

    Communication and settings of all parameters are carried out via the DeviceConfig configuration software.